Zobacz wÄ…tek - coÅ› na tor
NAS Analytics TAG

coÅ› na tor

Tutaj tylko zadajemy pytania o ocenę oferty motocykla, którą sobie upatrzyłeś. Dotyczy motocykli o pojemności większej niż 125 ccm.
_________

coÅ› na tor

Postprzez kasapoczta » 12/5/2011, 20:47

obecnie jeżdżę 696 i planuje zakup motocykla na tor. Ducati jest rewelacyjne ale żal go rozwalić, a i naprawa nie jest tania-jak to ducati. poszukuje motocykla typu ścigacz na wtrysku za cenę około 10 kilo. Myślę o cbr 1000, r1, lub kawie. co polecacie. założenie jest takie żeby części typu owiewki, sety sprzęgło, lusterka ... były tanie i łatwo dostępne. wiem, że każdy lisek swój... ale prosiłbym o konkretne sugestie :!:
Avatar użytkownika
kasapoczta
Świeżak
 
Posty: 3
Dołączył(a): 12/5/2011, 20:21
Lokalizacja: krakow


Postprzez Seba_ER5 » 12/5/2011, 22:57

szukaj cos bez prawa rejestracji z zagranicy. czasem sa walsneitesztuki z rozwalana rama areszta ok i wtedy tylko rame szukac bez prawa rejestracji. Czasem nawet pospawana. W UK kupuja takie moto z kategoria C. Za ta kase jednak bedzie ciezko. Na tor tol lepiej jakas 600 nawet starsza. W Uk sprzdaja czesto motocykle przygotowane juz na tor:
Mam nadzieje ze znasz english. Przykladowo(ale juz srpzedane) :
Due to serious car problems im selling my track project to get some funds.

Its a Kawasaki ZX6R G1 R reg (98). Im the 8th keeper and have only had it since Feb 2011. I brought it from Declangaelic from this site after he was knocked off.

The bike was damaged but was only cosmetics. Everything on the bike “will do” for track days....but if you want to super critical then read on

Since having it ive

Replaced the subframe
Replaced the gear side peg
Changed the coolant tank
Changed the oil/filter
Fitted the top fairing H mount
Fitted clock mount
Brand new Skidmarx race fairngs ( Need painting )
Race seat unit (From illy on here)
fuel tank/tap fitted ( needs sanding and paint )
Brand new battery
Tyres are nearly new with loads of life In them (2CT) as are chain and sprockets
Forks were upgraded by Declan with Ohlins internals and I think oil


To get it ready for track days it will need

Brakes cleaned and pads/fluid changed
Fuel cap
Possibly new key cut as the existing a a bit fiddly to turn
Lid for coolant tank
Gear change rod as old one is a tad bent
Clocks ( I wasnt going to bother )
Exhaust gasket for the end can as it blows a little
A general tune up and clean up

The bike is SORN'd until Feb 2011

Heres the link for my project with pics of how it was and how it is now

http://www.mcnninjas.co.uk/forum/index. ... ic=94570.0

The bike is in Aylesbury and will need collecting with a van or trailer.

I will throw in any other bits that I find laying around for it like rear light, nuts and bolts, old road fairings (might be of some use) etc

£700 or £650 to ninjas.
Avatar użytkownika
Seba_ER5
VIP Åšcigacz.pl
 
Posty: 5225
Dołączył(a): 27/8/2007, 19:58


Postprzez kasapoczta » 13/5/2011, 22:52

Avatar użytkownika
kasapoczta
Świeżak
 
Posty: 3
Dołączył(a): 12/5/2011, 20:21
Lokalizacja: krakow

Postprzez kasapoczta » 13/5/2011, 22:52

Avatar użytkownika
kasapoczta
Świeżak
 
Posty: 3
Dołączył(a): 12/5/2011, 20:21
Lokalizacja: krakow



Powrót do Oceny ofert sprzedaży.



Kto przeglÄ…da forum

Użytkownicy przeglądający ten dział: Brak zidentyfikowanych użytkowników i 1 gość




na górê